..
min read

Table of contents

Smart meters are being rolled out across NSW, with older electricity meters due to be replaced by 30 November 2030.

For most Central Coast homeowners, installation is straightforward. But what if your existing meter box isn't up to scratch?

Old wiring, asbestos panels, damaged equipment and other electrical issues can delay installation. And while the smart meter replacement itself has no upfront cost, homeowners are generally responsible for fixing any defects.

Here's what you need to know about the rollout, what could hold up your installation and how to get your meter box ready.

Quick Answer: What You Need to Know

  • The deadline: Older electricity meters across NSW are being replaced with smart meters by 30 November 2030.
  • The cost: Standard replacements under the national rollout have no upfront installation charge, but repairs or upgrades to your existing electrical setup may cost extra.
  • The process: Your electricity retailer arranges the installation, which normally takes around an hour.
  • Potential problems: Old wiring, asbestos, damaged meter boxes and undersized meter boards can delay installation.
  • Getting help: A licensed electrician can assess and rectify defects, with a Level 2 Accredited Service Provider (ASP) required for certain supply-side electrical work.

‍

What's Happening With the Smart Meter Rollout in NSW?

The NSW smart meter rollout is part of a national program to replace older electricity meters with digital smart meters by 30 November 2030.

Unlike traditional meters that need someone to visit your property and take a reading, smart meters can automatically record and transmit electricity usage information to your retailer.

This means they can:

  • Record how much electricity your home uses at different times of the day.
  • Send meter readings remotely, reducing the need for manual visits.
  • Help you better understand and manage your electricity use.
  • Support solar systems, home batteries and different electricity pricing options.

‍

Your electricity retailer will contact you when your property is scheduled for an upgrade. You don't need to arrange the standard rollout installation yourself.

Is a Smart Meter Mandatory in NSW?

Yes. Under the national rollout rules, customers can no longer opt out of having an older electricity meter replaced with a smart meter.

However, you can ask your electricity retailer to switch off the meter's remote communications function if you'd prefer manual readings. This may involve additional fees and limit your electricity plan options.

Will a Smart Meter Change Your Electricity Bill?

Getting a smart meter doesn't automatically mean you'll move to a different electricity tariff.

For the first two years after your smart meter is installed, your electricity provider generally can't change the way you're charged for electricity without your permission.

After that, different rules apply, including advance notice requirements. You can ask your electricity retailer how any proposed change would affect your bills.

What Happens on Smart Meter Installation Day?

Impact Electrical electrician preparing equipment beside a branded service van on the Central Coast.

‍

A standard smart meter installation usually takes around an hour, including a temporary power interruption.

According to the NSW Government, here's what you can generally expect:

  1. You'll receive a notice. Your electricity retailer will contact you at least four business days before installation, typically providing a five-business-day installation window.
  2. An installer will attend your property. They'll need safe access to your existing electricity meter and meter box.
  3. Your power will be temporarily switched off. The installer removes your old meter and fits the new smart meter.
  4. Your electricity is restored. Once the installation and necessary checks are complete, your new meter is ready to use.

‍

You generally won't need to be home if the installer can safely access your meter, although it's worth checking any instructions from your retailer.

If your meter box is in good condition and meets the installation requirements, that's usually all there is to it.

Unfortunately, not every property is quite so straightforward.

Why Might Your Meter Box Fail a Smart Meter Installation?

A smart meter installation can be delayed if the installer finds a site defect: an issue with your existing electrical setup that prevents the new meter from being safely installed.

This is particularly relevant for older Central Coast homes, where meter boards, wiring and electrical connections may have been in place for decades.

Common problems include:

1. Asbestos Meter Boards

Some older homes have meter boards containing asbestos. If asbestos is identified, the affected panel may need professional assessment and replacement before installation can proceed.

Never drill, cut or attempt to remove a suspected asbestos meter panel yourself.

2. Old or Unsafe Wiring

Outdated, damaged or non-compliant wiring around your meter can prevent installation. An electrician may need to repair or replace the affected wiring first.

3. Not Enough Room for the New Meter

Some older meter boards aren't large enough to accommodate a smart meter and its associated equipment, meaning a new meter board or meter box upgrade may be needed.

4. Damaged Meter Boxes

Cracked covers, corrosion or deteriorating enclosures can make a meter box unsuitable for installation, particularly in coastal areas where outdoor electrical equipment is exposed to the elements.

The required repairs will depend on the condition of your existing equipment.

5. Problems With Electrical Connections

Damaged consumer mains, faulty connections or other supply-side defects may need attention before installation.

Homes with private power poles or long overhead lines can have additional considerations, and some repairs may require a Level 2 electrician accredited to work on the Ausgrid network.

Who Pays if Your Meter Box Needs an Upgrade?

The property owner is responsible for paying to fix a site defect that prevents a smart meter installation.

It's important to distinguish between the smart meter replacement and any repairs to your existing electrical setup.

Work requiredWho pays?
Standard smart meter replacement under the national rolloutNo upfront charge from your electricity retailer
Repairs to unsafe or non-compliant wiringProperty owner
Replacement of an unsuitable meter boardProperty owner
Rectification of damaged meter box componentsProperty owner
Required supply-side electrical upgradesProperty owner

If you're renting, the landlord is responsible for the cost of repairs needed to allow the meter replacement to go ahead.

How Much Does a Meter Box Upgrade Cost?

The cost of a meter box upgrade depends on what's wrong with the existing setup and how much work is needed.

For example, replacing an unsuitable meter board is a different job from upgrading an entire switchboard or repairing consumer mains.

Factors that can influence the cost include:

  • The condition and age of your existing equipment.
  • Whether the meter board or complete enclosure needs replacing.
  • Any asbestos that requires professional assessment or removal.
  • The extent of electrical wiring repairs.
  • Whether supply disconnection, reconnection or Level 2 work is required.
  • Access to the meter box and associated electrical equipment.

‍

The best starting point is to have a licensed electrician inspect the issue and provide an upfront quote.

Received a Site Defect Notice? Here's What to Do Next

If your smart meter installer identifies a problem, your electricity provider will generally notify you that repairs are needed before installation can go ahead.

A site defect notice doesn't necessarily mean your entire electrical system needs replacing. Here's what to do next.

Step 1: Check the defect notice

Review the details to understand what's preventing installation and what needs attention.

Step 2: Contact a licensed electrician

Arrange an assessment of the affected equipment. Some repairs, particularly those involving mains or supply connections, require a Level 2 electrician.

Step 3: Get the repairs completed

Your electrician can explain what's required, provide an upfront quote and carry out the necessary work. This might include meter board repairs, wiring repairs or a switchboard upgrade.

Step 4: Rebook your installation

Once the defect is fixed, notify your electricity provider so they can arrange another smart meter installation.

Not sure what your defect notice means? Impact Electrical can assess the issue and help you work out the next steps.

When Do You Need a Level 2 Electrician for Smart Meter Work?

You'll need a Level 2 Accredited Service Provider (ASP) for electrical work involving your property's connection to the electricity network. This includes disconnecting and reconnecting mains, repairing consumer mains and working on the point of attachment.

On the Central Coast, this work must meet Ausgrid's network requirements. Other meter box repairs and upgrades can often be handled by a standard licensed electrician.

At Impact Electrical, our Level 2 electricians can help with:

  • Rectifying relevant electrical defect notices.
  • Consumer mains repairs and upgrades.
  • Electrical supply disconnections and reconnections.
  • Meter board and associated electrical upgrades.
  • Private power pole installations and replacements.
  • Three-phase power upgrades.
  • Coordinating the required Ausgrid paperwork.

‍

Impact Electrical can help fix defects and prepare your electrical setup for installation, while your electricity provider arranges the smart meter replacement.

Get Your Meter Box Smart Meter Ready With Impact Electrical

Four Impact Electrical team members standing outdoors in branded work uniforms.

‍

Received a smart meter defect notice or concerned your older meter box might need an upgrade? Impact Electrical can help.

We're a locally owned Central Coast electrical business, providing meter board repairs, switchboard upgrades and Level 2 electrical services across the Ausgrid network.

With 600+ five-star Google reviews, upfront pricing and a lifetime workmanship guarantee, we'll help get your electrical setup safe, compliant and ready for installation.

Get a free quote or call (02) 4063 1251 to speak with your local sparkies.

Frequently Asked Questions About Smart Meter Installation in NSW

Is it mandatory to have a smart meter in NSW?

Yes. Under the national rollout, older electricity meters are being replaced with smart meters by 30 November 2030. Customers cannot opt out of the replacement, although they can request that remote communications be disabled.

How much does smart meter installation cost in NSW?

Standard installations have no upfront charge, but homeowners are responsible for paying to fix any electrical defects that prevent installation.

Should I upgrade my meter box before getting a smart meter?

Not necessarily. If your meter box is safe and suitable, no additional work should be needed. However, an inspection may be worthwhile for older homes.

What happens if my meter box fails the inspection?

You'll need to arrange for the defect to be repaired before installation can proceed. Once fixed, contact your electricity provider to reschedule.

Do I need a Level 2 electrician to upgrade my meter box?

Not always. However, work involving consumer mains, supply connections or certain metering infrastructure requires an appropriately accredited Level 2 electrician.

Ready for electrical solutions that make an impact?

Contact us today for an obligation-free quote for your home or business.